The CONEC SlimCon series are very compact designs of IP67 tight D-SUB connectors with extremely small installation space requirements. The panel cut-out for the CONEC SlimCon series corresponds to that of other D-SUB connectors, so no new panel cut-outs are required and it is also possible to switch 1:1 from standard IP20 systems to the IP67 CONEC SlimCon series.
The one-piece zinc die-cast nickel plated shell provides – similar to the CONEC Solid Body series – outstanding mechanical robustness and protection. Based on its special design, the CONEC SlimCon series reduces the occupied space by 48% – 52% compared to Standard IP67 protected connectors.
Space saving Standard IP67 D-SUB – CONEC SlimCon
| Size | CONEC SlimCon IP67 | Standard IP67 D-SUB | Space saving | Reduction of mounting space |
| 1 | 30,88 mm x 12,8 mm | 39,4 mm x 21,1 mm | Width: 8,3 mm / 13,5 %
Height: 8,3 mm / 39 % | 52% |
| 2 | 39,22 mm x 12,8 mm | 47,7 mm x 21,1 mm | Width: 8,3 mm / 13,5 %
Height: 8,3 mm / 39 % | 50% |
| 3 | 53,1 mm x 12,8 mm | 61,4 mm x 21,1 mm | Width: 8,3 mm / 13,5%
Height: 8,3 mm / 39 % | 48% |
The IP67 CONEC SlimCon connector series are available in housing sizes 1 to 3 as male and female. Due to their small size and one-piece zinc die-cast housing, they are ideally suited for industrial and harsh environments. Four contact surfaces ensure that the connectors are always mounted evenly with the existing seal on the device wall, thus preventing overstressing of the seal and at the same time ensuring safe assembly at the customer’s site.
CONEC SlimCon connectors are designed for a panel thicknesses between 0.8 mm and 1.3 mm.
The IP67 CONEC SlimCon Filter series is sealed to the housing with a conductive EMC seal or optionally with a silicone seal. The housing sizes 1 to 3 are also available as male and female. Solder pin straight and solder cup contacts can be used. The integrated filters are offered with capacitance values of 370 pf, 820 pF and 1200 pF. Other capacitance values and special customer requirements can be created and offered on request.
Produktdetails:
Features:
- one-piece zinc die-cast shell
- 3.18 in PCB footprint
- Small dimensions
Fields of application:
- Drive technology
- Automation technology
- Communications
- Military
- Security and surveillance systems
IP67 D-SUB CONEC SlimCon connectors are available in the following versions:
>> CONEC SlimCon IP67 D-SUB Standard/High Density
>> CONEC SlimCon D-SUB Combination D-SUB
>> CONEC SlimCon D-SUB Filter
919 460 8800
Mon-Fri 8:30 – 5:00 ET
905 790 2200
M-F 8:30 – 4:30 ET
